For serial data transmission in the decentralized control system of buildings e.g. heating, ventilation, lighting, air-conditioning and closing systems. Here sensor signals or actor signals (e.g. the on / off from light or motors) are transmitted. Also as measuring and control cable for the transmission of measuring values in mains power equipment or processing data systems. This Bus-cable is suitable for installation in and under plaster and in suitable conduits.
-
Products
- Flexible Cables
- Control Cables
- EMC/VSD Cables
- Power Cables
- Single Core Cables
- Halogen Free Cables
- Intrinsically Safe Cables
- High Temperature Cables
- Data Cables
- BUS Cables
- Instrumentation Cables
- Treoflex Overall Screened pairs TA10
- Treoflex Overall Screened armoured pairs TA11
- Treoflex Individual & overall screened pairs TA12
- Treoflex Individual & overall screened armoured pairs TA13
- Treoflex Overall screened triads TA14
- Treoflex Overall screened armoured triads TA15
- Treoflex Individual & overall screened triads TA16
- Treoflex Individual & overall screened armoured triads TA17
- Shielded Multi-Conductor Ft-4
- Individually Foil Shielded Multi-Pair Ft-4
- Multi-Pair Foil & Braid Shield Ft-4
- Multi-Pair Foil & Braid Shield Ft-4
- Individually Foil Shielded Multi-Pair Ft-4
- Crane Cables
- Ship Cables
- Curly Cords
- Stage Event Cables
- Energy Chains
- Small loads
- E2 Micro - Inner heights 5-15mm, Inner widths 5-50mm
- E2.1 Micro - Inner heights 10.1-14.9mm, Inner widths 13.4-57.8mm
- E2 Micro - Inner heights 5-15.6mm, Inner widths 5-64mm
- Series 03 - Inner height 5mm, Inner widths 5-10mm
- Series 04 - Inner height 7mm, Inner widths 7-30mm
- Series 045 - Inner height 10.3mm, Inner width 6-64mm
- Series 05 - Inner height 10mm, Inner width 6-64mm
- Series 06 - Inner height 10.5mm, Inner width 6-64mm
- Series 08 - Inner height 15mm, Inner width 10 - 50mm
- Series B07 - Inner height 10.3mm, Inner width 6 - 64mm
- Series B09 - Inner height 14.3mm, Inner width 16-40mm
- Series 074 - Inner height 11.5mm, Inner widths 10-40mm
- Series 094 - Inner height 15.6mm, Inner width 10-40mm
- Easychain - Inner heights 5-48.5mm, Inner widths 5-100mm
- E2 Mini - Inner heights 17-41mm, Inner widths 15-100mm
- Series 10 - Inner height 18mm, Inner width 15 - 100mm
- Series 11.031 - Inner height 23mm, Inner width 31mm
- Series 11.080 - Inner height 28mm, Inner width 80mm
- Series 11.1/11.2 - Inner height 41mm, Inner widths 15-25mm
- Series 14 - Inner height 20mm, Inner widths 15-50mm
- Series F17 - Inner height 32mm, Inner width 15mm
- Series B15 - Inner height 17mm, Inner width 15 - 100mm
- Series B17 - Inner height 32mm, Inner width 15-100mm
- Zipper - Inner heights 9-32mm, Inner widths 6-100mm
- E2 Micro - Inner heights 5-15mm, Inner widths 5-50mm
- Medium-sized loads
- E2.1 - Inner heights 26-48mm, Inner widths 25-250mm
- E2/000 - Inner heights 21-45mm, Inner widths 15-250mm
- Series 1500 - Inner height 21mm, Inner widths 15-125mm, e-chain, "half" e-tube, e-tube
- Series 2500 - Inner height 25mm, Inner widths 25-125mm, e-chain, "half" e-tube, e-tube
- Series 2700 - Inner height 35mm, Inner widths 50-175mm, e-chain, "half" e-tube, e-tube
- Series 3500 - Inner height 45mm, Inner widths 50-250mm, e-chain, "half" e-tube, e-tube
- Series 255 - Inner height 24mm, Inner widths 38-103mm, e-chain, small pitch for low noise run at high speed
- e-tube fully enclosed - Protection against dirt and swarf
- High loads
- E4.1 - Inner heights 21-350mm, Inner widths 30-800mm
- Series E4.21 - Inner height 21mm, Inner width 30-120 mm
- Series E4.28 - Inner height 28mm, Inner width 40-300 mm
- Series E4.32 - Inner height 32mm, Inner width 50-400mm
- Series E4.42 - Inner height 42mm, Inner width 50-400mm
- Series E4.56 - Inner height 56mm, Inner width 50-600mm
- Series E4.80 - Inner height 80mm, Inner width 50-600mm
- E4.112 series - Inner height 112mm, Inner width 50-600mm
- E4.162 series - Inner height 162mm, Inner width 200-600mm
- Series 800 - Inner height 200mm, Inner width 200-600mm
- Series 840 - Inner height 204mm, Inner width 100-563mm
- Series E4.350 - Inner height 350mm, Inner width 400-800mm
- E4.1L - Inner heights 31-64mm, Inner widths 40-300mm
- E4Q - Inner heights 34-82mm, Inner widths 75-362mm
- E4/Light - Inner heights 56-112mm, Inner widths 50-600mm
- Series 14040 - Inner height hi 56mm, Inner widths 1.97-23.62 (50-600 mm)
- Series 14240 - Inner height 62mm, Inner widths 50-400mm
- Series 14550 - Inner height 70mm, Inner widths 50-600 mm
- Series 15050 - Inner height 80mm, Inner width 50-600mm
- Series 15250 - Inner height 86mm, Inner width 50-600mm
- Series 1640 - Inner height 112mm, Inner widths 125-600mm
- e-tube fully enclosed - Protection against dirt and swarf
- E4.1 - Inner heights 21-350mm, Inner widths 30-800mm
- Robotic Applications
- Fully enclosed for protection against dirt and swarf
- Smooth running, cleanroom
- Long Travels
- Simple, static applications
- 3D movements & non-robotics
- Circular, rotary or spiral movement
- Corrugated tube & corrugated tube accessories
- Accessories
- Special Solutions
- 3D CAD portal
- Small loads
- chainflex®
- Control Cables
- PVC
- PUR
- TPE
- CF9 – For the heaviest duty applications
- CF10 – For the heaviest duty applications, screened
- CF9.UL – For extremely heavy-duty applications
- CF10.UL – For extremely heavy-duty applications, screened
- CF98 – For extremely heavy-duty applications with small bending radius
- CF99 – For extremely heavy-duty applications with small bending radius, screened
- Data, Coax & Thermocouple Cables
- Bus Cables
- Fibre Optic Cables
- Measuring System Cables
- Servo Cables
- Power Cables
- Robotic Cables
- Pneumatic Hoses
- Harnessed Cables
- Drive Technology
- Harnessed cables suitable for Allen Bradley
- Harnessed cables suitable for B&R
- Harnessed cables suitable for Baumüller
- Harnessed cables suitable for Beckhoff
- Harnessed cables suitable for ELAU
- Harnessed cables suitable for FAGOR
- Harnessed cables suitable for FANUC
- Harnessed cables suitable for Festo
- Harnessed cables suitable for Heidenhain
- Harnessed cables suitable for Jetter
- Harnessed cables suitable for Danaher Motion
- Harnessed cables suitable for Lenze
- Harnessed cables suitable for LTi DRIVES
- Harnessed cables suitable for Mitsubishi
- Harnessed cables suitable for Control Techniques
- Cable Assemblies Built suitable for NUM
- Harnessed cables suitable for Omron
- Harnessed cables suitable for Parker
- Harnessed cables suitable for SEW
- Harnessed cables suitable for Siemens
- Cable Assemblies Built suitable for Stöber
- Harnessed cables suitable for Berger Lahr
- Cable Assemblies Built suitable for Linmot
- Robot Cables
- Industrial Connectors
- Sensor/Actuator Cables
- Fibre Optic Cables
- Network Technology
- Video/Vision/Bus Technology Cables
- Drive Technology
- Control Cables
- Connectors
- Rectangular Multipole Connectors
- Inserts
- CNE...RY - 6 PIN to 48 PIN
- CK, CKD, CK-RY, CKSH-SQUICH® - 10A - 230/400V - 4 & 5 PIN
- CD - 10A-250V - 7 PIN to 124 PIN
- CDD - 10A-250V - 24 PIN to 216 PIN
- CP... RY - 35A-400/690V - 6&12 PIN
- CX COMBINED INSERTS - 230V-830V
- CDA - CSAH - SQUICH - 16A-250V - 10 PIN to 32 PIN
- CDC - 16 PIN to 32 PIN
- CDSH-SQUICH-CDSH NC-SQUICH - 10A 400V - 9 PIN to 84 PIN
- CSH-SQUICH - 16A-500V - 6 PIN to 48 PIN
- CSH S-SQUICH - 6 PIN to 48 PIN
- CMSH-SQUICH-CMCE - 16A-830V - 3, 6, 10, 12, 20 PIN with auxiliary poles
- CQ - 6,5A-10A-16A-40A - 2 PIN to 21 PIN
- Data Connectors
- CCE - 16A-500V - 6 PIN to 48 PIN
- CSS - 16A-500V - 6 PIN to 48 PIN
- CT-CTS-CTSE - 6 PIN - 48 PIN
- CQE-CQEE - 16A-500V - 10 PIN - 92 PIN
- HNM - 10A-250V - 40 PIN - 216 PIN
- Housings
- Size 44.27 (standard 6 pole)
- Size 57.27 (standard 10 pole)
- Size 77.27 (standard 16 pole)
- Size 104.27 (standard 24 pole)
- Size 77.62 (standard 32 pole)
- Size 104.62 (standard 48 pole)
- Size 49.16 (standard 10 pole slim)
- Size 66.16 (standard 16 pole slim)
- Size 66.40 (standard 32 pole slim)
- Size 21.21 (standard 3p+e & 4p&e)
- RJ 45 connectors
- Size 32.13
- High Temperature
- Thermo Plastic
- Hygienic
- W Type
- E-Xtreme
- EMC
- BIG
- Central Lever
- IP68
- LS Type for Entertainment Industry
- Crimp tools
- Coding Pins
- Crimp pins
- Accessories
- Inserts
- Ceeform Connectors
- Powerline Connectors
- Solutions for Stage Lighting
- Circular Connectors for Industrial Applications
- Rectangular Multipole Connectors
- Flexible Conduits
- Conduits
- Fittings
- PMA DIVISABLE
- Fire Barrier Solutions
- Food & Beverage
- EMC System
- PMAJACK
- PMA Automation
- PMA Ex System for Hazardous Areas
- Multilayer Solutions for Railway
- PMA Jumbo Sizes
- Swivel Connectors
- Accessories
- Special Products
- Cables Glands and Accessories
- Safety
- Multi-functional Gate Systems
- Transponder-coded safety switches
- Electromechanical safety switches
- Magnetically coded safety
- Safety Relay, control systems and filter modules
- Emergency stop devices
- Electronic Key Systems
- Rope Pull Switches
- Time delay relays
- Two Hand relays
- Expander modules
- Programmable Controllers
- Ancillary Products
- Safety Edge
- Safety Lights Curtains
- Pneumatic Valves
- Output Devices
- Power supplies
- Press Safety Lasers
- Sensors
- Photoelectronic Sensors
- High-Performance Distance Sensors
- Reflex Sensors
- Reflex Sensors with Background Suppression
- Fiber-Optic Cable Sensors
- Fiber-Optic Cables
- Contrast Sensors
- Luminescence Sensors
- Colour Sensors
- Print Mark Readers
- Gloss Sensors
- Sensors for Roller Conveyor Systems
- Reflex Light Barriers
- Retro-Reflex Sensors
- Retro-Reflex Sensors for Clear Glass Recognition
- Fork Sensors
- Temperature Sensors for Contactless Measurement
- Light Curtains Pick-to-Light
- Light Curtains for Measuring Tasks
- Ultrasonic Sensors
- Inductive Sensors
- Inductive Sensors with Standard Switching Distances
- Inductive Sensors with Increased Switching Distances
- Inductive Sensors with IO-Link
- Inductive Sensors with Full-Metal Housing
- Inductive Sensors with Analog Output
- Inductive Sensors Welding Field Resistant with Correction Factor 1
- Inductive Sensors with Selective Performance
- Inductive Sensors for Extreme Temperature Ranges
- Fluid Sensors
- Image Processing and Smart Cameras
- 2D/3D Sensors
- 1D/2D Barcode Scanners
- Safety Technology
- Industrial Communication
- System Components and Software
- Photoelectronic Sensors
- Measuring Systems and Controllers
- Bearings
- Plastic Plain Bearings
- Clip Bearings, Piston rings and more
- Slewing Ring Bearings
- High Torsional Stability: Type 01
- With Outer Drive Ring: Type 01
- Lightweight: Type 02
- Low-cost: Type 03
- Compact, lightweight and cost-effective: Type 04
- Installation solutions: Type 04
- With assembled drive pin: Type 04
- Slewing rings with gear teeth: Type 04
- Stainless steel slewing rings: Type 04
- Slot nut profile: Type 04
- Special geometries and accessories
- Universal sliding elements
- iglidur Bar Stock, Tubes, Plates & Liners
- Stock Bar - All Rounder
- Stock Bar - Endurance Runner
- iglidur® J: The versatile endurance runner
- iglidur® W300: The classic endurance runner up to 30MPa
- iglidur® J3: Specialist for pivoting and pulsating loads
- iglidur® J350: Endurance runner with high dimensional stability at high temperature
- iglidur® J260: ideal for plastic shafts
- iglidur® R: Low-cost material
- iglidur® J200: Specially for aluminium shafts
- iglidur® E7: Ideal for pivoting movement
- iglidur® JB: Extremely wear-resistant in black
- Stock Bar - High Temperatures
- Stock Bar - High Media Resistance
- Stock Bar - Contact with Food
- iglidur® A181: The allrounder for food, FDA and EU 10/2011-compliant
- iglidur® A350: The FDAcompliant endurance runner at high temperatures
- iglidur® A500: The media and temperature specialist in the food sector
- iglidur® A180: The all-rounder for food
- iglidur® A160: "Food" material with high media resistance up to +90°C
- iglidur® UW160: For contact with drinking water
- iglidur® T220: For the tobacco industry
- Stock Bar - Special Application Areas
- Stock Bar - Tubes
- Stock Bar - Mechanical Processing
- Stock Bar - Plates
- Stock Bar - Tribo Tape
- iglidur tribo 3D printing
- Spherical Bearings
- Ball bearings and Accessories
- Modular Linear technology
- drylin® W Profile Guides
- Single Rails, Square: WSQ-XX
- Pillow Blocks, Square: WJ200QM
- Single Rails, Round: WS-XX
- Single Rails, Round Made of Stainless Steel: WS-XX-ES-(FG)
- Pillow Blocks, Round: WJ200UM
- Pillow Blocks, Round Made of Stainless Steel: WJUM-XX-ES-(FG)
- Tandem Pillow Blocks: WJ200UMT-XX-AL
- Manual Clearance Adjustment: WJ(200)UME
- With Spring Pre-Load: WJ(200)UM-XX-P
- Pillow Blocks, Single, Round: WJ200UMA-XX-AL
- Double Rails: Square/Round, WSQ-/WS-XX-XX
- High Torsional Rigidity: High Profile Rails
- Linear Guides – Lightweight, Non-Metallic: WSPC
- Linear Guides - Lightweight, Non-Metallic: WSPG
- Complete Carriages: Square/Round - WW/WWQ
- Mono-Slide Carriages: WWC
- Round Double Rail, Made of Stainless Steel: WS-XX-XX-ES-(FG)
- Assembled Stainless Steel Guide Carriage, Round: WW-XX-XX-GESG-PES
- Curved Rail Profiles: WSB
- Single Bearings for Curved Rails: WI3UBP-XX-LLZ
- Carriages for Curved Rails: WWB
- Double Rails with Machine Recesses: WS(Q)-XX-CAM
- Complete Carriages for Slider: WW-XX-SL
- Hybrid Slider Carriages with Four Double Roller Bearings: WWH-XX-SL
- drylin® W Hybrid Roller Bearings
- Hybrid Rail for Lateral Installation: WSR
- Hybrid Roller Bearing for Hybrid Lateral Rail: WJRM-31/41
- Single Hybrid Roller Bearings: WJRM-01
- Double Hybrid Roller Bearings: WJRM-21
- Hybrid Single and Double Rollers, Stainless Steel: WRJM-XX-ES-FG
- Hybrid Carriages for Lateral Installation: WWR-21-XX
- Hybrid Carriages with Four Double Roller Bearings: WWH-21
- Hybrid Carriages for Horizontal Installation: WWH-10
- Mounting Plate for Drylin® W Hybrid Roller Bearing: WWYR
- drylin® Linear Technology – Accessories
- Manual Clamp for Simple Positioning: WHKA-XX-(AL)/WHKAQ
- Manual Clamp for Higher Holding Force: WHKD
- Manual Clamp for drylin® W hybrid Roller Bearings: WJRM-21-XX-HKA
- Liners Made From dry-tech® Polymers
- Plastic Liners: J200UMA-XX
- End Caps for drylin® High Profile Rails WSX: WSX-XX-EC
- Mounting Plate for Linear Carriage: WWY
- drylin® N Low-Profile Linear Guides
- For Small Spaces and High Load Capacity: Installation size 17
- The Largest Variety of Carriages (options): Installation size 27
- Suitable for Aluminium Construction Profiles: Installation size 40
- High Loads with Reduced Height: Installation size 80
- Prism Rails: NSV-01-27
- Prism Carriages: NWV-XX
- Accessories: Manual clamp - NW-XX-HKA
- Accessories: End Pap - NSKB, NSK
- drylin® Telescopic Rails - NT
- drylin® T Rail Guides
- drylin® R
- drylin® R Liners
- drylin® R special designs
- drylin® R solid plastic bearings
- drylin® R Linear Plain Bearings
- Closed Aluminium Adapters - RJUM-01
- Closed Aluminium Adapters, Precise - RJUM-11
- Closed Adapters Made of Stainless Steel 303 - RJUM-ES
- Closed, Anodised Aluminium Adapters, Short Design - RJUM-02
- Closed, Anodised Aluminium Adapter - RE7UM-01
- Closed, Anodised Aluminium Adapters, Short Design - RE7UM-02
- Closed Aluminium Adapters Floating Bearings - RJUM-03
- Split Aluminium Adapters - TJUM-01
- Split Aluminium Adapters, Floating Bearings - TJUM-03
- Open, Anodised Aluminium Adapters, for Supported Shafts - OJUM-01
- Open Aluminium Adapters, Floating Bearing - OJUM-03
- drylin® R Pillow Blocks
- Closed Aluminium Adapters, Short Design - RJUM-05
- Closed, Adjustable Aluminium Adapters, Short Design - RJUME-05
- Split Aluminium Adapters, Short Design - TJUM-05
- Closed Aluminium Adapters, Tandem Design - RJUMT-05
- Closed Aluminium Adapters, Long Design - RJUM-06
- Closed Aluminium Adapters, with Manual Clamp - RJUM-06-XX-HK
- Closed Housings, Floating Bearings - RJUM-06-XX-LL
- Open Housings, Floating Bearings - OJUM-06-XX-LL
- Open Aluminium Adapters, Long Design - OJUM-06
- Open Aluminium Adapters, with Manual Clamp - OJUM-06-XX-HK
- Open, Adjustable Aluminium Adapters, Long Design - OJUME-06
- Quad Blocks, Closed Design - RQA
- Quad Blocks, Open Design - OQA
- Closed Tandem Design - RTA
- Open Tandem Design - OTA
- Closed, Long Design - RGA
- Open, Long Design - OGA
- Closed, Short Design - RGAS
- Open, Short Design - OGAS
- drylin® R Flanged Linear Plain Bearings
- drylin® R Shafts
- Precision Aluminium Shafts - AWMP/AWMR
- Supported Aluminium Shafts - AWMU
- Steel Shafts - SWM/SWMH
- Supported Steel Shafts - SWUM/SWUMN
- Stainless Steel Shafts - EWM/EEWM/EWMR
- Supported Stainless Steel Shafts - EWUM
- Low Level Supported Stainless Steel Shafts - EWUMN
- Partially Supported Stainless Steel Shafts - EWUM-ES/EWUMS-ES
- Low Level Partially Supported Stainless Steel Shafts - EWUMN-/EWUMSN-ES
- Carbon Fibre Shafts - CWM
- Shaft End Supports, Floating - TA
- Shaft End Supports, Fixed - TAF
- Shaft End Blocks, Standard Design - WA
- Shaft End Blocks, Compact Design - WAC
- Shaft End Block, Narrow Design - WAS
- drylin® Q Square Linear Guides
- Square Section Linear Rails - AWMQ
- Adjustable Linear Carriages - QWE-01
- Adjustable Linear Carriages with Manual Clamp - QWE-01-XX-HKA
- Pillow Blocks - QJRM(T)-05
- Fixed Flange Bearings with Round Flange - QJFM(T)-01
- Fixed Flange Bearings with Square Flange - QJFM(T)-02
- Solid Plastic Linear Bearings - QJRMP-01
- Accessories for drylin® Q
- Clearance Adjustment for Columns - ASDJ
- drylin® Digital Measuring Systems
- Integrated Measuring Systems for drylin® Q - QKM
- Ready-to-Install Measuring Systems for drylin® SLW Linear Modules - SLWM
- Digital Measuring System for drylin® W - WKM2
- Measuring System with Positionable Readout Display for drylin® W - WKMEDR
- Measuring Systems for External Data Output for drylin® W - WKMEX
- drylin® Carbon Fibre
- drylin® Stainless-steel
- Closed Adapters Made of Stainless Steel 303 - RJUM-XX-ES
- Stainless Steel Guides, Single/Double Rails - WS-XX-ES-FG
- Pillow Blocks, Made from 316 Stainless Steel - WJUM-XX-ES-FG
- Hybrid Roller Bearings Made of Stainless Steel - WJRM-01/WJRM-21
- Assembled Stainless Steel Guide Carriages, Round - WW-XX-GESG-PES
- Stainless Steel Shafts - EWM/EEWM/EWMR
- Supported Stainless Steel Shafts - EWUM
- Partially Supported Stainless Steel Shafts - EWUM-ES/EWUMS-ES
- Low Level Supported Stainless Steel Shafts - EWUMN
- Low Level Partially Supported Stainless Steel Shafts - EWUMN
- Stainless Steel Linear Modules - SHT-ESJ
- Hygienic Design Linear Module - SHTC-XX-HYD
- Stainless Steel Linear Modules - SLW-ES
- XY Tables Stainless Steel Version - SLW-XY-ES
- Reverse Modular Axes - ZLW-20
- drylin® W Profile Guides
- Efficient Lead Screw Technology
- High Helix Thread with Dryspin Technology
- High Helix Lead Screws Made of Stainless Steel and Aluminium
- High Helix Lead Screws With Right/Left Opposite Drive
- Cylindrical Lead Screw Nuts
- Lead Screw Nuts with Flange
- Lead Screw Nuts with Spanner Flat, with Flange
- Cost-Effective Injection-Moulded Lead Screw Nuts, Cylindrical/with Flange
- Lead Screw Nuts with Pre-Load iglidur® J
- Lead Screw Nuts, Zero-Backlash iglidur® J
- Trapezoidal and Metric Threads
- Lead Screws C15
- Lead Screws Made of Stainless Steel
- Lead Screws Made of Aluminium
- Lead Screws with Machined End
- Multi Start Lead Screws
- LH/RH Lead Screws
- Metric Lead Screws
- Cylindrical Lead Screw Nuts, Single Start
- Cylindrical Lead Screw Nuts, Multi Start
- Cylindrical Lead Screw Nuts with Spanner Flat
- Lead Screw Nuts with Flange, Single Start
- Lead Screw Nuts with Flange, Multi Start
- Lead Screw Nuts with Spanner Flat, with Flange
- Cylindrical Lead Screw Nuts, Lead Screw Nuts with Flange Metric
- Cost-Effective Injection-Moulded Lead Screw Nuts
- Anti-Backlash Lead Screw Nuts
- Flange Lead Screw Nuts with Pre-Load
- Special Designs
- Split Lead Screw Nuts Made From iglidur® J
- Lead Screw Nuts for Linear Modules
- Lead Screw Nuts with Locating Spigot
- Spherical Lead Screw Nuts in Flanged Bearing Housing
- Spherical Lead Screw Nuts in Pillow Block Bearing Housing
- Lead Screw Nuts with Quick-Release
- drylin® Discs Made from iglidur® J
- Complete Lead Screw Nut Housing, Including Lead Screw Nut
- Lead Screw Support Blocks with Plain Bearings
- Lead Screw Support Blocks with Ball Bearings
- Clamping Rings
- High Helix Thread with Dryspin Technology
- Drive Technology
- SHT Linear Modules
- Self-Locking: SHT
- Axial Pre-Load, Radial Adjustment: SHT-PL
- Compact Design: SHTC
- The Fast One with dryspin® High Helix Thread: SHTS
- With Ball Bearing Supported Lead Screw: SHT-BB
- Made of Stainless Steel: SHT-ESJ
- Hygienic Design: SHTC-HYD
- With Quick-Release Mechanism: SHTC-FF
- With Quick-Release Mechanism: SHT-FF
- XY Table: SHT-XY
- SLW Linear Modules
- Self-Locking: SLW
- Axial Pre-Load, Radial Adjustment: SLWE-PL
- With Ball Bearing Supported Lead Screws: SLEW-BB
- The Fast One with dryspin® High Helix Thread: SLWS
- With Protected Lead Screw: SLW-PT
- Dual Action Linear System: SLWT
- Stainless Steel Version: SLW-ES
- XY Tables: SLW-XY
- XY Tables – Stainless Steel Version: SLW-XY-ES
- SAW Linear Modules
- Easytube Linear Unit
- Flat Linear Modules
- Miniature Linear Modules
- ZLW Toothed Belt Axes
- Cantilever Axes
- Lead Screw Motors
- Econ Entry - Level Series
- SHT Linear Modules
- Imperial Sizes
- Gearboxes
- Linear Units
- Clamping Systems
- Clamping Equipment for Woodworking
- Clamping Equipment for 1-Circuit Systems
- Clamping Equipment for 2-Circuit Systems
- Clamping Equipment for Systems from Biesse
- Clamping Equipment for Systems from SCM / Morbidelli
- Clamping Equipment for Grid Table Systems
- Clamping Equipment for Nesting Table Systems
- Clamping Equipment for Flat Table Systems
- Flexibilization of CNC Machining Centers
- Clamping Equipment for Manual Work
- Clamping Equipment for Narrow Workpieces
- Replacement Suction Plates
- Clamping Equipment for Glass Processing
- Clamping Equipment for Metal and Plastic Processing
- Clamping Equipment for 3D Freeform Surfaces
- Clamping Equipment for Woodworking
- Vacuum Technology
- Vacuum Technology for Automation
- Individual Vacuum Components
- Vacuum Suction Cups
- Flat Suction Cups (round)
- Flat Suction Cups (oval)
- Bellows Suction Cups (Round)
- Bellows Suction Cups FSGA (1.5 Folds)
- Bellows Suction Cups FSG (2.5 Folds)
- Bellows Suction Cups SAB (1.5 Folds)
- Bellows Suction Cups FSGA (1.5 Folds) from Ø 110 mm
- Bellows Suction Cups FSGPL (1.5 Folds)
- Bellows Suction Cups SAB HT2 (1.5 Folds)
- Bellows Suction Cups SABT-C (1.5 Folds)
- Bellows Suction Cups with Sealing Ring
- Bellows Suction Cups FSGB (3.5 Folds)
- Bellows Suction Cups (Oval)
- Suction Cups for Handling Sheet Metal
- Bellows suction cups SAXB
- Bell-Shaped Suction Cups SAX
- Bellows Suction Cups SAB (1.5 Folds)
- Bell-Shaped Suction Cups SAXM
- Bell-Shaped Suction Cups SAOXM (Oval)
- Flat Suction Cups SAF
- Flat Suction Cups SAF HT2
- Bellows Suction Cups SAB HT2 (1.5 Folds)
- Bellows Suction Cups SABT-C (1.5 Folds)
- Flat Suction Cups SAOF (Oval)
- Flat Suction Cups SAOF HT2 (Oval)
- Bellows Suction Cups SAOB (Oval, 1.5 Folds)
- Bellows Suction Cups SAOB HT2 (Oval, 1.5 Folds)
- Bell-Shaped Suction Cups SAOG (Oval)
- Bell-Shaped Suction Cups SAOG-S
- Bell-Shaped Suction Cups SAG
- Edge Gripper Suction Cups SAOK (Oval)
- Edge Gripper Suction Cups for Hot Forming SAOK HT2 (Oval)
- Bellows Suction Cups SAB2 P (2.5 Folds)
- Flat Suction Cups PFYN VU1
- Bellows Suction Cups FSG VU1 (2.5 Folds)
- Bellows Suction Cups FSGA VU1 (1.5 Folds)
- Flat Suction Cups SAFT-C
- Suction Cups for Handling Wood
- Suction Cups for Packaging
- Bin-Picking Suction Cups SVE
- Flat Suction Cups SPF
- Bellows Suction Cups SPB1 (1.5 Folds)
- Bellows Suction Cups SPOB1 (Oval, 1.5 Folds)
- Bellows Suction Cups SPOB1f (Oval, 1.5 Folds)
- Bellows Suction Cups SPB2 (2.5 Folds)
- Bellows Suction Cups SPB2f (2.5 Folds)
- Bellows Suction Cups SPB2 P (2.5 Folds)
- Bellows Suction Cups SPB2 P (2.5 Folds) Flow Restrictor
- Bellows Suction Cups SPB4 (4.5 Folds)
- Bellows Suction Cups SPB4f (4.5 Folds)
- Bellows Suction Cups FSDC
- Bellows Suction Cups FGA PVC (1.5 Folds)
- Bellows Suction Cups FG PVC (2.5 Folds)
- Bellows Suction Cups FSGA SI-HD (1.5 Folds)
- Bellows Suction Cups FSGA SI-MD (1.5 Folds)
- Bellows Suction Cups FSGB-R (Rectangular)
- Chocolate Suction Cups SPG
- Schmalz Test Set - Suction Cups for the Packaging Industry
- Flat Suction Cups PFYN VU1
- Bellows Suction Cups FSG SI-HD (2.5 Folds)
- Suction Cups for the Electronics Industry
- Suction Cups for Handling Glass
- Suction Cups for Plastic Films and Paper
- Suction Cups for High-Temperature Applications
- Suction Cups for Handling Composites
- Sealing Profiles
- Accessories Vacuum Suction Cups
- Suction Cups for Different Industries
- Special Grippers
- Floating Suction Cups
- Magnetic Grippers
- Needle Grippers
- Needle Grippers SNG-AP
- Electric Needle Grippers SNGi-AE
- Needle Grippers SNG-V
- Needle Grippers SNG-M
- Needle Grippers SNG-DL
- Needle Grippers SNG-BV
- Accessories Needle Grippers SNG-AP
- Accessories Needle Grippers SNGi-AE
- Accessories Needle Grippers SNG-V
- Accessories Needle Grippers SNG-M
- Accessories Needle Grippers SNG-BV
- Wafer Grippers
- Flow Grippers
- Thin Glass Grippers
- Feed Ejectors
- Vacuum Lifting Cylinders
- Area Gripping Systems and Effectors
- Mounting Elements
- Vacuum Generators
- Ejector Modules
- Basic Ejectors
- Inline Ejectors
- Decentralized Ejectors
- Compact Ejectors
- Compact Ejectors SCPS / SCPSi
- Compact Ejectors SCPSb
- Compact Ejectors SCPi / SMPi
- Compact Ejectors SCPMb / SCPMc / SCPMi
- Compact Ejectors SCPM
- Compact Ejectors SCPb / SCPi FS RP
- Compact Ejectors SCP / SMP
- Compact Ejectors SCP-FS
- Compact Ejectors X-Pump SXPi / SXMPi with IO-Link
- Compact Ejectors SXMPi Class B
- Compact Ejectors SCPS-L / SCPSi-L
- Compact Ejectors SCPS- / SCPSb- / SCPSi-UHV-HD
- Compact Ejectors SEM-C
- Compact Terminals
- Vacuum Generators End-of-Arm
- Vacuum Pumps
- Vacuum Blowers
- Vacuum Reservoirs
- Vacuum Centers
- Vacuum Units
- Valve Technology
- Switches and System Monitoring
- Filters and Connections
- Didactic
- Digital Solutions
- Vacuum Suction Cups
- Vacuum Gripping Systems
- Layer Gripping Systems
- Suction Spider
- Area Gripping Systems and End Effectors
- Individual Vacuum Components
- Vacuum Technology for Robotics
- Vacuum Generators
- Vacuum Technology for Automation
- Flexible Cables
- Vacuum Lifters and Crane Systems
- Pneumatics
- Conveying Components
- Drives
- Series EC5000 - RollerDrive for straight sections
- Series DL0080 - Drive for light applications
- Series DL0113 - Drive for light applications
- Series DM0080 - Belt drive for the construction of individual conveyor systems
- Series DM0113 - Belt drive for the construction of individual conveyor systems
- Series DM0138 - Belt drive for the construction of individual conveyor systems
- Series DM0165 - Belt drive for the construction of individual conveyor systems
- Series DM0217 - Belt drive for the construction of individual conveyor systems
- Rollers and Wheels
- Series 1100 - Gravity conveyor roller
- Series 1200 - Steel conveyor roller for extreme ambient temperatures
- Series 1500/1520 - Slide bearing conveyor roller for wet and hygiene areas
- Series 1700 light - Universal Conveyor Roller
- Series 1700 - Universal Conveyor Roller
- Series 1700 KXO - Tapered universal conveyor roller
- Series 3500 Light - Fixed drive conveyor roller
- Series 3500 - Fixed drive conveyor roller
- Series 3500KXO light - Tapered fixed drive conveyor roller for curves
- Series 3500KXO - Tapered fixed drive conveyor roller for curves
- Series 3800 - Friction conveyor roller
- Series 3870 - Double friction conveyor roller
- Series MSC 50 - Magnetic speed controller
- Series 3800 light Friction conveyor roller/double friction conveyor roller
- Drives
- e-Catalogue Downloads
- About Us
- News
- e-Catalogues
- Contact Us
- Home
- Flexible Cables
- BUS Cables
- BUS-EIB/KNX