Flex-CY-JZ POWER can be installed in all electrical systems in dry and damp interiors. especially in industrial environments and can also be used outside; underwater installation is not permitted. Flex-CY-JZ POWER is suitable as measuring, monitoring and control cable in the machine tool and plant engineering, assembly lines and production lines. These cables with copper screening are ideally suitable for interference-free data and signal transmission in measuring and control technology. Good chemical resistance, largely oil resistant.
-
Products
- Flexible Cables
- Control Cables
- EMC/VSD Cables
- Power Cables
- Single Core Cables
- Halogen Free Cables
- Intrinsically Safe Cables
- High Temperature Cables
- Data Cables
- BUS Cables
- Instrumentation Cables
- Treoflex Overall Screened pairs TA10
- Treoflex Overall Screened armoured pairs TA11
- Treoflex Individual & overall screened pairs TA12
- Treoflex Individual & overall screened armoured pairs TA13
- Treoflex Overall screened triads TA14
- Treoflex Overall screened armoured triads TA15
- Treoflex Individual & overall screened triads TA16
- Treoflex Individual & overall screened armoured triads TA17
- Shielded Multi-Conductor Ft-4
- Individually Foil Shielded Multi-Pair Ft-4
- Multi-Pair Foil & Braid Shield Ft-4
- Multi-Pair Foil & Braid Shield Ft-4
- Individually Foil Shielded Multi-Pair Ft-4
- Crane Cables
- Ship Cables
- Curly Cords
- Stage Event Cables
- Energy Chains
- Small loads
- E2 Micro - Inner heights 5-15mm, Inner widths 5-50mm
- E2.1 Micro - Inner heights 10.1-14.9mm, Inner widths 13.4-57.8mm
- E2 Micro - Inner heights 5-15.6mm, Inner widths 5-64mm
- Series 03 - Inner height 5mm, Inner widths 5-10mm
- Series 04 - Inner height 7mm, Inner widths 7-30mm
- Series 045 - Inner height 10.3mm, Inner width 6-64mm
- Series 05 - Inner height 10mm, Inner width 6-64mm
- Series 06 - Inner height 10.5mm, Inner width 6-64mm
- Series 08 - Inner height 15mm, Inner width 10 - 50mm
- Series B07 - Inner height 10.3mm, Inner width 6 - 64mm
- Series B09 - Inner height 14.3mm, Inner width 16-40mm
- Series 074 - Inner height 11.5mm, Inner widths 10-40mm
- Series 094 - Inner height 15.6mm, Inner width 10-40mm
- Easychain - Inner heights 5-48.5mm, Inner widths 5-100mm
- E2 Mini - Inner heights 17-41mm, Inner widths 15-100mm
- Series 10 - Inner height 18mm, Inner width 15 - 100mm
- Series 11.031 - Inner height 23mm, Inner width 31mm
- Series 11.080 - Inner height 28mm, Inner width 80mm
- Series 11.1/11.2 - Inner height 41mm, Inner widths 15-25mm
- Series 14 - Inner height 20mm, Inner widths 15-50mm
- Series F17 - Inner height 32mm, Inner width 15mm
- Series B15 - Inner height 17mm, Inner width 15 - 100mm
- Series B17 - Inner height 32mm, Inner width 15-100mm
- Zipper - Inner heights 9-32mm, Inner widths 6-100mm
- E2 Micro - Inner heights 5-15mm, Inner widths 5-50mm
- Medium-sized loads
- E2.1 - Inner heights 26-48mm, Inner widths 25-250mm
- E2/000 - Inner heights 21-45mm, Inner widths 15-250mm
- Series 1500 - Inner height 21mm, Inner widths 15-125mm, e-chain, "half" e-tube, e-tube
- Series 2500 - Inner height 25mm, Inner widths 25-125mm, e-chain, "half" e-tube, e-tube
- Series 2700 - Inner height 35mm, Inner widths 50-175mm, e-chain, "half" e-tube, e-tube
- Series 3500 - Inner height 45mm, Inner widths 50-250mm, e-chain, "half" e-tube, e-tube
- Series 255 - Inner height 24mm, Inner widths 38-103mm, e-chain, small pitch for low noise run at high speed
- e-tube fully enclosed - Protection against dirt and swarf
- High loads
- E4.1 - Inner heights 21-350mm, Inner widths 30-800mm
- Series E4.21 - Inner height 21mm, Inner width 30-120 mm
- Series E4.28 - Inner height 28mm, Inner width 40-300 mm
- Series E4.32 - Inner height 32mm, Inner width 50-400mm
- Series E4.42 - Inner height 42mm, Inner width 50-400mm
- Series E4.56 - Inner height 56mm, Inner width 50-600mm
- Series E4.80 - Inner height 80mm, Inner width 50-600mm
- E4.112 series - Inner height 112mm, Inner width 50-600mm
- E4.162 series - Inner height 162mm, Inner width 200-600mm
- Series 800 - Inner height 200mm, Inner width 200-600mm
- Series 840 - Inner height 204mm, Inner width 100-563mm
- Series E4.350 - Inner height 350mm, Inner width 400-800mm
- E4.1L - Inner heights 31-64mm, Inner widths 40-300mm
- E4Q - Inner heights 34-82mm, Inner widths 75-362mm
- E4/Light - Inner heights 56-112mm, Inner widths 50-600mm
- Series 14040 - Inner height hi 56mm, Inner widths 1.97-23.62 (50-600 mm)
- Series 14240 - Inner height 62mm, Inner widths 50-400mm
- Series 14550 - Inner height 70mm, Inner widths 50-600 mm
- Series 15050 - Inner height 80mm, Inner width 50-600mm
- Series 15250 - Inner height 86mm, Inner width 50-600mm
- Series 1640 - Inner height 112mm, Inner widths 125-600mm
- e-tube fully enclosed - Protection against dirt and swarf
- E4.1 - Inner heights 21-350mm, Inner widths 30-800mm
- Robotic Applications
- Fully enclosed for protection against dirt and swarf
- Smooth running, cleanroom
- Long Travels
- Simple, static applications
- 3D movements & non-robotics
- Circular, rotary or spiral movement
- Corrugated tube & corrugated tube accessories
- Accessories
- Special Solutions
- 3D CAD portal
- Small loads
- chainflex®
- Control Cables
- PVC
- PUR
- TPE
- CF9 – For the heaviest duty applications
- CF10 – For the heaviest duty applications, screened
- CF9.UL – For extremely heavy-duty applications
- CF10.UL – For extremely heavy-duty applications, screened
- CF98 – For extremely heavy-duty applications with small bending radius
- CF99 – For extremely heavy-duty applications with small bending radius, screened
- Data, Coax & Thermocouple Cables
- Bus Cables
- Fibre Optic Cables
- Measuring System Cables
- Servo Cables
- Power Cables
- Robotic Cables
- Pneumatic Hoses
- Harnessed Cables
- Drive Technology
- Harnessed cables suitable for Allen Bradley
- Harnessed cables suitable for B&R
- Harnessed cables suitable for Baumüller
- Harnessed cables suitable for Beckhoff
- Harnessed cables suitable for ELAU
- Harnessed cables suitable for FAGOR
- Harnessed cables suitable for FANUC
- Harnessed cables suitable for Festo
- Harnessed cables suitable for Heidenhain
- Harnessed cables suitable for Jetter
- Harnessed cables suitable for Danaher Motion
- Harnessed cables suitable for Lenze
- Harnessed cables suitable for LTi DRIVES
- Harnessed cables suitable for Mitsubishi
- Harnessed cables suitable for Control Techniques
- Cable Assemblies Built suitable for NUM
- Harnessed cables suitable for Omron
- Harnessed cables suitable for Parker
- Harnessed cables suitable for SEW
- Harnessed cables suitable for Siemens
- Cable Assemblies Built suitable for Stöber
- Harnessed cables suitable for Berger Lahr
- Cable Assemblies Built suitable for Linmot
- Robot Cables
- Industrial Connectors
- Sensor/Actuator Cables
- Fibre Optic Cables
- Network Technology
- Video/Vision/Bus Technology Cables
- Drive Technology
- Control Cables
- Connectors
- Rectangular Multipole Connectors
- Inserts
- CNE...RY - 6 PIN to 48 PIN
- CK, CKD, CK-RY, CKSH-SQUICH® - 10A - 230/400V - 4 & 5 PIN
- CD - 10A-250V - 7 PIN to 124 PIN
- CDD - 10A-250V - 24 PIN to 216 PIN
- CP... RY - 35A-400/690V - 6&12 PIN
- CX COMBINED INSERTS - 230V-830V
- CDA - CSAH - SQUICH - 16A-250V - 10 PIN to 32 PIN
- CDC - 16 PIN to 32 PIN
- CDSH-SQUICH-CDSH NC-SQUICH - 10A 400V - 9 PIN to 84 PIN
- CSH-SQUICH - 16A-500V - 6 PIN to 48 PIN
- CSH S-SQUICH - 6 PIN to 48 PIN
- CMSH-SQUICH-CMCE - 16A-830V - 3, 6, 10, 12, 20 PIN with auxiliary poles
- CQ - 6,5A-10A-16A-40A - 2 PIN to 21 PIN
- Data Connectors
- CCE - 16A-500V - 6 PIN to 48 PIN
- CSS - 16A-500V - 6 PIN to 48 PIN
- CT-CTS-CTSE - 6 PIN - 48 PIN
- CQE-CQEE - 16A-500V - 10 PIN - 92 PIN
- HNM - 10A-250V - 40 PIN - 216 PIN
- Housings
- Size 44.27 (standard 6 pole)
- Size 57.27 (standard 10 pole)
- Size 77.27 (standard 16 pole)
- Size 104.27 (standard 24 pole)
- Size 77.62 (standard 32 pole)
- Size 104.62 (standard 48 pole)
- Size 49.16 (standard 10 pole slim)
- Size 66.16 (standard 16 pole slim)
- Size 66.40 (standard 32 pole slim)
- Size 21.21 (standard 3p+e & 4p&e)
- RJ 45 connectors
- Size 32.13
- High Temperature
- Thermo Plastic
- Hygienic
- W Type
- E-Xtreme
- EMC
- BIG
- Central Lever
- IP68
- LS Type for Entertainment Industry
- Crimp tools
- Coding Pins
- Crimp pins
- Accessories
- Inserts
- Ceeform Connectors
- Powerline Connectors
- Solutions for Stage Lighting
- Circular Connectors for Industrial Applications
- Rectangular Multipole Connectors
- Flexible Conduits
- Conduits
- Fittings
- PMA DIVISABLE
- Fire Barrier Solutions
- Food & Beverage
- EMC System
- PMAJACK
- PMA Automation
- PMA Ex System for Hazardous Areas
- Multilayer Solutions for Railway
- PMA Jumbo Sizes
- Swivel Connectors
- Accessories
- Special Products
- Cables Glands and Accessories
- Safety
- Multi-functional Gate Systems
- Transponder-coded safety switches
- Electromechanical safety switches
- Magnetically coded safety
- Safety Relay, control systems and filter modules
- Emergency stop devices
- Electronic Key Systems
- Rope Pull Switches
- Time delay relays
- Two Hand relays
- Expander modules
- Programmable Controllers
- Ancillary Products
- Safety Edge
- Safety Lights Curtains
- Pneumatic Valves
- Output Devices
- Power supplies
- Press Safety Lasers
- Sensors
- Photoelectronic Sensors
- High-Performance Distance Sensors
- Reflex Sensors
- Reflex Sensors with Background Suppression
- Fiber-Optic Cable Sensors
- Fiber-Optic Cables
- Contrast Sensors
- Luminescence Sensors
- Colour Sensors
- Print Mark Readers
- Gloss Sensors
- Sensors for Roller Conveyor Systems
- Reflex Light Barriers
- Retro-Reflex Sensors
- Retro-Reflex Sensors for Clear Glass Recognition
- Fork Sensors
- Temperature Sensors for Contactless Measurement
- Light Curtains Pick-to-Light
- Light Curtains for Measuring Tasks
- Ultrasonic Sensors
- Inductive Sensors
- Inductive Sensors with Standard Switching Distances
- Inductive Sensors with Increased Switching Distances
- Inductive Sensors with IO-Link
- Inductive Sensors with Full-Metal Housing
- Inductive Sensors with Analog Output
- Inductive Sensors Welding Field Resistant with Correction Factor 1
- Inductive Sensors with Selective Performance
- Inductive Sensors for Extreme Temperature Ranges
- Fluid Sensors
- Image Processing and Smart Cameras
- 2D/3D Sensors
- 1D/2D Barcode Scanners
- Safety Technology
- Industrial Communication
- System Components and Software
- Photoelectronic Sensors
- Measuring Systems and Controllers
- Bearings
- Plastic Plain Bearings
- Clip Bearings, Piston rings and more
- Slewing Ring Bearings
- High Torsional Stability: Type 01
- With Outer Drive Ring: Type 01
- Lightweight: Type 02
- Low-cost: Type 03
- Compact, lightweight and cost-effective: Type 04
- Installation solutions: Type 04
- With assembled drive pin: Type 04
- Slewing rings with gear teeth: Type 04
- Stainless steel slewing rings: Type 04
- Slot nut profile: Type 04
- Special geometries and accessories
- Universal sliding elements
- iglidur Bar Stock, Tubes, Plates & Liners
- Stock Bar - All Rounder
- Stock Bar - Endurance Runner
- iglidur® J: The versatile endurance runner
- iglidur® W300: The classic endurance runner up to 30MPa
- iglidur® J3: Specialist for pivoting and pulsating loads
- iglidur® J350: Endurance runner with high dimensional stability at high temperature
- iglidur® J260: ideal for plastic shafts
- iglidur® R: Low-cost material
- iglidur® J200: Specially for aluminium shafts
- iglidur® E7: Ideal for pivoting movement
- iglidur® JB: Extremely wear-resistant in black
- Stock Bar - High Temperatures
- Stock Bar - High Media Resistance
- Stock Bar - Contact with Food
- iglidur® A181: The allrounder for food, FDA and EU 10/2011-compliant
- iglidur® A350: The FDAcompliant endurance runner at high temperatures
- iglidur® A500: The media and temperature specialist in the food sector
- iglidur® A180: The all-rounder for food
- iglidur® A160: "Food" material with high media resistance up to +90°C
- iglidur® UW160: For contact with drinking water
- iglidur® T220: For the tobacco industry
- Stock Bar - Special Application Areas
- Stock Bar - Tubes
- Stock Bar - Mechanical Processing
- Stock Bar - Plates
- Stock Bar - Tribo Tape
- iglidur tribo 3D printing
- Spherical Bearings
- Ball bearings and Accessories
- Modular Linear technology
- drylin® W Profile Guides
- Single Rails, Square: WSQ-XX
- Pillow Blocks, Square: WJ200QM
- Single Rails, Round: WS-XX
- Single Rails, Round Made of Stainless Steel: WS-XX-ES-(FG)
- Pillow Blocks, Round: WJ200UM
- Pillow Blocks, Round Made of Stainless Steel: WJUM-XX-ES-(FG)
- Tandem Pillow Blocks: WJ200UMT-XX-AL
- Manual Clearance Adjustment: WJ(200)UME
- With Spring Pre-Load: WJ(200)UM-XX-P
- Pillow Blocks, Single, Round: WJ200UMA-XX-AL
- Double Rails: Square/Round, WSQ-/WS-XX-XX
- High Torsional Rigidity: High Profile Rails
- Linear Guides – Lightweight, Non-Metallic: WSPC
- Linear Guides - Lightweight, Non-Metallic: WSPG
- Complete Carriages: Square/Round - WW/WWQ
- Mono-Slide Carriages: WWC
- Round Double Rail, Made of Stainless Steel: WS-XX-XX-ES-(FG)
- Assembled Stainless Steel Guide Carriage, Round: WW-XX-XX-GESG-PES
- Curved Rail Profiles: WSB
- Single Bearings for Curved Rails: WI3UBP-XX-LLZ
- Carriages for Curved Rails: WWB
- Double Rails with Machine Recesses: WS(Q)-XX-CAM
- Complete Carriages for Slider: WW-XX-SL
- Hybrid Slider Carriages with Four Double Roller Bearings: WWH-XX-SL
- drylin® W Hybrid Roller Bearings
- Hybrid Rail for Lateral Installation: WSR
- Hybrid Roller Bearing for Hybrid Lateral Rail: WJRM-31/41
- Single Hybrid Roller Bearings: WJRM-01
- Double Hybrid Roller Bearings: WJRM-21
- Hybrid Single and Double Rollers, Stainless Steel: WRJM-XX-ES-FG
- Hybrid Carriages for Lateral Installation: WWR-21-XX
- Hybrid Carriages with Four Double Roller Bearings: WWH-21
- Hybrid Carriages for Horizontal Installation: WWH-10
- Mounting Plate for Drylin® W Hybrid Roller Bearing: WWYR
- drylin® Linear Technology – Accessories
- Manual Clamp for Simple Positioning: WHKA-XX-(AL)/WHKAQ
- Manual Clamp for Higher Holding Force: WHKD
- Manual Clamp for drylin® W hybrid Roller Bearings: WJRM-21-XX-HKA
- Liners Made From dry-tech® Polymers
- Plastic Liners: J200UMA-XX
- End Caps for drylin® High Profile Rails WSX: WSX-XX-EC
- Mounting Plate for Linear Carriage: WWY
- drylin® N Low-Profile Linear Guides
- For Small Spaces and High Load Capacity: Installation size 17
- The Largest Variety of Carriages (options): Installation size 27
- Suitable for Aluminium Construction Profiles: Installation size 40
- High Loads with Reduced Height: Installation size 80
- Prism Rails: NSV-01-27
- Prism Carriages: NWV-XX
- Accessories: Manual clamp - NW-XX-HKA
- Accessories: End Pap - NSKB, NSK
- drylin® Telescopic Rails - NT
- drylin® T Rail Guides
- drylin® R
- drylin® R Liners
- drylin® R special designs
- drylin® R solid plastic bearings
- drylin® R Linear Plain Bearings
- Closed Aluminium Adapters - RJUM-01
- Closed Aluminium Adapters, Precise - RJUM-11
- Closed Adapters Made of Stainless Steel 303 - RJUM-ES
- Closed, Anodised Aluminium Adapters, Short Design - RJUM-02
- Closed, Anodised Aluminium Adapter - RE7UM-01
- Closed, Anodised Aluminium Adapters, Short Design - RE7UM-02
- Closed Aluminium Adapters Floating Bearings - RJUM-03
- Split Aluminium Adapters - TJUM-01
- Split Aluminium Adapters, Floating Bearings - TJUM-03
- Open, Anodised Aluminium Adapters, for Supported Shafts - OJUM-01
- Open Aluminium Adapters, Floating Bearing - OJUM-03
- drylin® R Pillow Blocks
- Closed Aluminium Adapters, Short Design - RJUM-05
- Closed, Adjustable Aluminium Adapters, Short Design - RJUME-05
- Split Aluminium Adapters, Short Design - TJUM-05
- Closed Aluminium Adapters, Tandem Design - RJUMT-05
- Closed Aluminium Adapters, Long Design - RJUM-06
- Closed Aluminium Adapters, with Manual Clamp - RJUM-06-XX-HK
- Closed Housings, Floating Bearings - RJUM-06-XX-LL
- Open Housings, Floating Bearings - OJUM-06-XX-LL
- Open Aluminium Adapters, Long Design - OJUM-06
- Open Aluminium Adapters, with Manual Clamp - OJUM-06-XX-HK
- Open, Adjustable Aluminium Adapters, Long Design - OJUME-06
- Quad Blocks, Closed Design - RQA
- Quad Blocks, Open Design - OQA
- Closed Tandem Design - RTA
- Open Tandem Design - OTA
- Closed, Long Design - RGA
- Open, Long Design - OGA
- Closed, Short Design - RGAS
- Open, Short Design - OGAS
- drylin® R Flanged Linear Plain Bearings
- drylin® R Shafts
- Precision Aluminium Shafts - AWMP/AWMR
- Supported Aluminium Shafts - AWMU
- Steel Shafts - SWM/SWMH
- Supported Steel Shafts - SWUM/SWUMN
- Stainless Steel Shafts - EWM/EEWM/EWMR
- Supported Stainless Steel Shafts - EWUM
- Low Level Supported Stainless Steel Shafts - EWUMN
- Partially Supported Stainless Steel Shafts - EWUM-ES/EWUMS-ES
- Low Level Partially Supported Stainless Steel Shafts - EWUMN-/EWUMSN-ES
- Carbon Fibre Shafts - CWM
- Shaft End Supports, Floating - TA
- Shaft End Supports, Fixed - TAF
- Shaft End Blocks, Standard Design - WA
- Shaft End Blocks, Compact Design - WAC
- Shaft End Block, Narrow Design - WAS
- drylin® Q Square Linear Guides
- Square Section Linear Rails - AWMQ
- Adjustable Linear Carriages - QWE-01
- Adjustable Linear Carriages with Manual Clamp - QWE-01-XX-HKA
- Pillow Blocks - QJRM(T)-05
- Fixed Flange Bearings with Round Flange - QJFM(T)-01
- Fixed Flange Bearings with Square Flange - QJFM(T)-02
- Solid Plastic Linear Bearings - QJRMP-01
- Accessories for drylin® Q
- Clearance Adjustment for Columns - ASDJ
- drylin® Digital Measuring Systems
- Integrated Measuring Systems for drylin® Q - QKM
- Ready-to-Install Measuring Systems for drylin® SLW Linear Modules - SLWM
- Digital Measuring System for drylin® W - WKM2
- Measuring System with Positionable Readout Display for drylin® W - WKMEDR
- Measuring Systems for External Data Output for drylin® W - WKMEX
- drylin® Carbon Fibre
- drylin® Stainless-steel
- Closed Adapters Made of Stainless Steel 303 - RJUM-XX-ES
- Stainless Steel Guides, Single/Double Rails - WS-XX-ES-FG
- Pillow Blocks, Made from 316 Stainless Steel - WJUM-XX-ES-FG
- Hybrid Roller Bearings Made of Stainless Steel - WJRM-01/WJRM-21
- Assembled Stainless Steel Guide Carriages, Round - WW-XX-GESG-PES
- Stainless Steel Shafts - EWM/EEWM/EWMR
- Supported Stainless Steel Shafts - EWUM
- Partially Supported Stainless Steel Shafts - EWUM-ES/EWUMS-ES
- Low Level Supported Stainless Steel Shafts - EWUMN
- Low Level Partially Supported Stainless Steel Shafts - EWUMN
- Stainless Steel Linear Modules - SHT-ESJ
- Hygienic Design Linear Module - SHTC-XX-HYD
- Stainless Steel Linear Modules - SLW-ES
- XY Tables Stainless Steel Version - SLW-XY-ES
- Reverse Modular Axes - ZLW-20
- drylin® W Profile Guides
- Efficient Lead Screw Technology
- High Helix Thread with Dryspin Technology
- High Helix Lead Screws Made of Stainless Steel and Aluminium
- High Helix Lead Screws With Right/Left Opposite Drive
- Cylindrical Lead Screw Nuts
- Lead Screw Nuts with Flange
- Lead Screw Nuts with Spanner Flat, with Flange
- Cost-Effective Injection-Moulded Lead Screw Nuts, Cylindrical/with Flange
- Lead Screw Nuts with Pre-Load iglidur® J
- Lead Screw Nuts, Zero-Backlash iglidur® J
- Trapezoidal and Metric Threads
- Lead Screws C15
- Lead Screws Made of Stainless Steel
- Lead Screws Made of Aluminium
- Lead Screws with Machined End
- Multi Start Lead Screws
- LH/RH Lead Screws
- Metric Lead Screws
- Cylindrical Lead Screw Nuts, Single Start
- Cylindrical Lead Screw Nuts, Multi Start
- Cylindrical Lead Screw Nuts with Spanner Flat
- Lead Screw Nuts with Flange, Single Start
- Lead Screw Nuts with Flange, Multi Start
- Lead Screw Nuts with Spanner Flat, with Flange
- Cylindrical Lead Screw Nuts, Lead Screw Nuts with Flange Metric
- Cost-Effective Injection-Moulded Lead Screw Nuts
- Anti-Backlash Lead Screw Nuts
- Flange Lead Screw Nuts with Pre-Load
- Special Designs
- Split Lead Screw Nuts Made From iglidur® J
- Lead Screw Nuts for Linear Modules
- Lead Screw Nuts with Locating Spigot
- Spherical Lead Screw Nuts in Flanged Bearing Housing
- Spherical Lead Screw Nuts in Pillow Block Bearing Housing
- Lead Screw Nuts with Quick-Release
- drylin® Discs Made from iglidur® J
- Complete Lead Screw Nut Housing, Including Lead Screw Nut
- Lead Screw Support Blocks with Plain Bearings
- Lead Screw Support Blocks with Ball Bearings
- Clamping Rings
- High Helix Thread with Dryspin Technology
- Drive Technology
- SHT Linear Modules
- Self-Locking: SHT
- Axial Pre-Load, Radial Adjustment: SHT-PL
- Compact Design: SHTC
- The Fast One with dryspin® High Helix Thread: SHTS
- With Ball Bearing Supported Lead Screw: SHT-BB
- Made of Stainless Steel: SHT-ESJ
- Hygienic Design: SHTC-HYD
- With Quick-Release Mechanism: SHTC-FF
- With Quick-Release Mechanism: SHT-FF
- XY Table: SHT-XY
- SLW Linear Modules
- Self-Locking: SLW
- Axial Pre-Load, Radial Adjustment: SLWE-PL
- With Ball Bearing Supported Lead Screws: SLEW-BB
- The Fast One with dryspin® High Helix Thread: SLWS
- With Protected Lead Screw: SLW-PT
- Dual Action Linear System: SLWT
- Stainless Steel Version: SLW-ES
- XY Tables: SLW-XY
- XY Tables – Stainless Steel Version: SLW-XY-ES
- SAW Linear Modules
- Easytube Linear Unit
- Flat Linear Modules
- Miniature Linear Modules
- ZLW Toothed Belt Axes
- Cantilever Axes
- Lead Screw Motors
- Econ Entry - Level Series
- SHT Linear Modules
- Imperial Sizes
- Gearboxes
- Linear Units
- Clamping Systems
- Clamping Equipment for Woodworking
- Clamping Equipment for 1-Circuit Systems
- Clamping Equipment for 2-Circuit Systems
- Clamping Equipment for Systems from Biesse
- Clamping Equipment for Systems from SCM / Morbidelli
- Clamping Equipment for Grid Table Systems
- Clamping Equipment for Nesting Table Systems
- Clamping Equipment for Flat Table Systems
- Flexibilization of CNC Machining Centers
- Clamping Equipment for Manual Work
- Clamping Equipment for Narrow Workpieces
- Replacement Suction Plates
- Clamping Equipment for Glass Processing
- Clamping Equipment for Metal and Plastic Processing
- Clamping Equipment for 3D Freeform Surfaces
- Clamping Equipment for Woodworking
- Vacuum Technology
- Vacuum Technology for Automation
- Individual Vacuum Components
- Vacuum Suction Cups
- Flat Suction Cups (round)
- Flat Suction Cups (oval)
- Bellows Suction Cups (Round)
- Bellows Suction Cups FSGA (1.5 Folds)
- Bellows Suction Cups FSG (2.5 Folds)
- Bellows Suction Cups SAB (1.5 Folds)
- Bellows Suction Cups FSGA (1.5 Folds) from Ø 110 mm
- Bellows Suction Cups FSGPL (1.5 Folds)
- Bellows Suction Cups SAB HT2 (1.5 Folds)
- Bellows Suction Cups SABT-C (1.5 Folds)
- Bellows Suction Cups with Sealing Ring
- Bellows Suction Cups FSGB (3.5 Folds)
- Bellows Suction Cups (Oval)
- Suction Cups for Handling Sheet Metal
- Bellows suction cups SAXB
- Bell-Shaped Suction Cups SAX
- Bellows Suction Cups SAB (1.5 Folds)
- Bell-Shaped Suction Cups SAXM
- Bell-Shaped Suction Cups SAOXM (Oval)
- Flat Suction Cups SAF
- Flat Suction Cups SAF HT2
- Bellows Suction Cups SAB HT2 (1.5 Folds)
- Bellows Suction Cups SABT-C (1.5 Folds)
- Flat Suction Cups SAOF (Oval)
- Flat Suction Cups SAOF HT2 (Oval)
- Bellows Suction Cups SAOB (Oval, 1.5 Folds)
- Bellows Suction Cups SAOB HT2 (Oval, 1.5 Folds)
- Bell-Shaped Suction Cups SAOG (Oval)
- Bell-Shaped Suction Cups SAOG-S
- Bell-Shaped Suction Cups SAG
- Edge Gripper Suction Cups SAOK (Oval)
- Edge Gripper Suction Cups for Hot Forming SAOK HT2 (Oval)
- Bellows Suction Cups SAB2 P (2.5 Folds)
- Flat Suction Cups PFYN VU1
- Bellows Suction Cups FSG VU1 (2.5 Folds)
- Bellows Suction Cups FSGA VU1 (1.5 Folds)
- Flat Suction Cups SAFT-C
- Suction Cups for Handling Wood
- Suction Cups for Packaging
- Bin-Picking Suction Cups SVE
- Flat Suction Cups SPF
- Bellows Suction Cups SPB1 (1.5 Folds)
- Bellows Suction Cups SPOB1 (Oval, 1.5 Folds)
- Bellows Suction Cups SPOB1f (Oval, 1.5 Folds)
- Bellows Suction Cups SPB2 (2.5 Folds)
- Bellows Suction Cups SPB2f (2.5 Folds)
- Bellows Suction Cups SPB2 P (2.5 Folds)
- Bellows Suction Cups SPB2 P (2.5 Folds) Flow Restrictor
- Bellows Suction Cups SPB4 (4.5 Folds)
- Bellows Suction Cups SPB4f (4.5 Folds)
- Bellows Suction Cups FSDC
- Bellows Suction Cups FGA PVC (1.5 Folds)
- Bellows Suction Cups FG PVC (2.5 Folds)
- Bellows Suction Cups FSGA SI-HD (1.5 Folds)
- Bellows Suction Cups FSGA SI-MD (1.5 Folds)
- Bellows Suction Cups FSGB-R (Rectangular)
- Chocolate Suction Cups SPG
- Schmalz Test Set - Suction Cups for the Packaging Industry
- Flat Suction Cups PFYN VU1
- Bellows Suction Cups FSG SI-HD (2.5 Folds)
- Suction Cups for the Electronics Industry
- Suction Cups for Handling Glass
- Suction Cups for Plastic Films and Paper
- Suction Cups for High-Temperature Applications
- Suction Cups for Handling Composites
- Sealing Profiles
- Accessories Vacuum Suction Cups
- Suction Cups for Different Industries
- Special Grippers
- Floating Suction Cups
- Magnetic Grippers
- Needle Grippers
- Needle Grippers SNG-AP
- Electric Needle Grippers SNGi-AE
- Needle Grippers SNG-V
- Needle Grippers SNG-M
- Needle Grippers SNG-DL
- Needle Grippers SNG-BV
- Accessories Needle Grippers SNG-AP
- Accessories Needle Grippers SNGi-AE
- Accessories Needle Grippers SNG-V
- Accessories Needle Grippers SNG-M
- Accessories Needle Grippers SNG-BV
- Wafer Grippers
- Flow Grippers
- Thin Glass Grippers
- Feed Ejectors
- Vacuum Lifting Cylinders
- Area Gripping Systems and Effectors
- Mounting Elements
- Vacuum Generators
- Ejector Modules
- Basic Ejectors
- Inline Ejectors
- Decentralized Ejectors
- Compact Ejectors
- Compact Ejectors SCPS / SCPSi
- Compact Ejectors SCPSb
- Compact Ejectors SCPi / SMPi
- Compact Ejectors SCPMb / SCPMc / SCPMi
- Compact Ejectors SCPM
- Compact Ejectors SCPb / SCPi FS RP
- Compact Ejectors SCP / SMP
- Compact Ejectors SCP-FS
- Compact Ejectors X-Pump SXPi / SXMPi with IO-Link
- Compact Ejectors SXMPi Class B
- Compact Ejectors SCPS-L / SCPSi-L
- Compact Ejectors SCPS- / SCPSb- / SCPSi-UHV-HD
- Compact Ejectors SEM-C
- Compact Terminals
- Vacuum Generators End-of-Arm
- Vacuum Pumps
- Vacuum Blowers
- Vacuum Reservoirs
- Vacuum Centers
- Vacuum Units
- Valve Technology
- Switches and System Monitoring
- Filters and Connections
- Didactic
- Digital Solutions
- Vacuum Suction Cups
- Vacuum Gripping Systems
- Layer Gripping Systems
- Suction Spider
- Area Gripping Systems and End Effectors
- Individual Vacuum Components
- Vacuum Technology for Robotics
- Vacuum Generators
- Vacuum Technology for Automation
- Flexible Cables
- Vacuum Lifters and Crane Systems
- Pneumatics
- Conveying Components
- Drives
- Series EC5000 - RollerDrive for straight sections
- Series DL0080 - Drive for light applications
- Series DL0113 - Drive for light applications
- Series DM0080 - Belt drive for the construction of individual conveyor systems
- Series DM0113 - Belt drive for the construction of individual conveyor systems
- Series DM0138 - Belt drive for the construction of individual conveyor systems
- Series DM0165 - Belt drive for the construction of individual conveyor systems
- Series DM0217 - Belt drive for the construction of individual conveyor systems
- Rollers and Wheels
- Series 1100 - Gravity conveyor roller
- Series 1200 - Steel conveyor roller for extreme ambient temperatures
- Series 1500/1520 - Slide bearing conveyor roller for wet and hygiene areas
- Series 1700 light - Universal Conveyor Roller
- Series 1700 - Universal Conveyor Roller
- Series 1700 KXO - Tapered universal conveyor roller
- Series 3500 Light - Fixed drive conveyor roller
- Series 3500 - Fixed drive conveyor roller
- Series 3500KXO light - Tapered fixed drive conveyor roller for curves
- Series 3500KXO - Tapered fixed drive conveyor roller for curves
- Series 3800 - Friction conveyor roller
- Series 3870 - Double friction conveyor roller
- Series MSC 50 - Magnetic speed controller
- Series 3800 light Friction conveyor roller/double friction conveyor roller
- Drives
- e-Catalogue Downloads
- About Us
- News
- e-Catalogues
- Contact Us
- Home
- Flexible Cables
- Control Cables
- Flex-CY-JZ Power