for angle and speed detection / axial and radial versions in different geometries
RADIAL AND AXIAL VERSIONS IN DIFFERENT DIAMETERS
Magnetic pole rings in conjunction with the appropriate sensor technology are used wherever rotary movements, such as angular positions and speeds on axes and drives, have to be detected, monitored and controlled. The magnetic scanning principle is not only non-contact, wear-free and low-maintenance, it is also extremely robust under extreme environmental conditions. Since the complete system is bearing free, mechanical influences do not directly affect the entire sensor.
- Magnetic rings in radial (MRR) or axial (MRA) design
- Suitable for a wide range of ELGO incremental sensors as well as for the battery powered IZ Series (measurement and display systems)
- Three different pole lengths available (2 / 2.5 / 5 mm)
- Contactless and therefore wear-free scanning
- Thanks to protection class IP68 predestined for outdoor use
- Resistant to thermal, chemical and mechanical influences
The incremental sensors of the product series LMIX, EMIX, GMIX, KMIX, RMIX as well as the battery-operated measuring and display systems of the IZ series can be used for scanning the magnetic rings.
Pole length 2 mm: EMIX1/2, EMIX23, EMSC1/2, RMIX2
Pole length 2.5 mm: IZ14E, IZ15E, IZ16E, IZ17E
Pole length 5 mm: LMIX1/2, LMIX22, GMIX1A, GMIX2, KMIX2, LMSC1/2